Description
The Western W30 SD pumps 1/2 inch (-12mm) minus aggregate up to 25 yards per hour and was engineered with the contractor in mind. All it’s components are made of the highest quality materials and engineering designed to last while providing you consistent results.
Western W30 is equipped with powerful dependable engines (Diesel or Gasoline) and a heavy duty centrifugal clutch. It also uses the hinged manifold locking system, a centralized lubrication system ad piston lubricating box which allows smoother pumping, easier clean-up,faster set-up and higher dependability.
- Masonary Grouting
- Decks & Patios
- Shotcrete
- Columns
- Footings
- Swimming pools
- Slope stabilization
- Lining (Ditch, Reservoir, Channel)
- Vault construction
- Foundations
- Slabs & Basements
- Piling
- Grout
- Slurries
- Slab jacking
- .. Much more!
Pump Design: | Reciprocating Piston |
Valve: | Ball & Seat |
Maximum Aggregate Size: | 1/2 inch Minus (12 mm) |
Pumping Rate *: | 25 cu. yds. per hour |
Horizontal Pumping Distance*: | 400 ft. (122 m) |
Vertical Pumping Height*: | 100 ft. (30 m) |
Outlet Size: | 3 inches HD (76 mm) |
Cylinder Diameter: | 6 inches (153 mm) |
Cylinder Length: | 12 inches (305 mm) |
Gas Engine: | Wisconsin VH4D 30HP |
Diesel Engine: | Hatz 2M41Z 37HP |
Fuel Capacity: | 18 gallons (68 liters) |
Hopper Height: | 50 inches (1.27 m) |
Hopper Capacity: | 6 cubic feet (170 liters) |
Length: | 145 inches (3.68 m) |
Width: | 60 inches (1.52 m) |
Height: | 63 inches (1.60 m) |
Weight Gas**: | 2586 Lbs. (1173 kg) |
Weight Diesel**: | 2758 Lbs. (1263 kg) |
Tire: | 14 inches |
Remote Control: | 200 ft. of cable |