water-batching-system
,

Water Batching System Buying guide

What is the Mortar Water Batching System?

The Mortar Water Batching System is a simple and accurate way to measure water for your mortar batches. It consists of a water tank, a pump, and a timer. Just set the timer and press the button – the system will automatically dispense the amount of water needed for your batch. The system can be used with any size of a mortar mixer.

PDQuipment carries the best water batching system for your needs. We have systems that can be used with electric or gas mortar mixers. Our systems are made with high-quality materials, and we are available to answer any questions about maintenance and repairs.

Why Use a Mortar Water Batching System?

There are many benefits to using a Mortar Water Batching System:

– Simplify the water measuring operation for your labor

– Big time saver and easy to use

– Save money and be more accurate. You will also save time. Our best water batching system will save up to 25% of your water usage

– Get a consistent mix every time

– Reduce the amount of waste you produce

– Eliminate waste and inconsistency

– Ensure the best results by using clean, fresh water in your mortar mix

How Does the Mortar Water Batching System Work?

Our best water batching system is straightforward to use. Just set the timer and press the button – the system will automatically dispense the amount of water needed for your batch. Add it to your water usage routine to improve performance and save resources!

Always use clean, fresh water in your mortar mix for best results. If using city water, we recommend using a filter to remove any chlorine or other chemicals which can damage the pump or other parts of the system. A simple carbon filter like those used on fish tanks will work well and only needs to be replaced every few months.

What Are the Parts of the Mortar Water Batching System?

The Mortar Water Batching System consists of a water tank, pump, and timer.

How Often Should I Calibrate My Mortar Water Batching System?

We recommend calibrating your system before each use to ensure accuracy. This only takes a few minutes and only needs to be done once per day.

To calibrate, simply put a timer on 5 gallons and see how long it takes to fill. This will give you a good idea of your flow rate for that day.

How Do I Clean the Mortar Water Batching System?

It is best practice to clean the system after each use. Water batching systems should be flushed with clean water after each use. A small amount of dish soap can be used to help remove any mortar residue.

Can I Use the Mortar Water Batching System with Any Mortar Mixer?

Yes, the system can be used with any size mortar mixer.

Do I Need a Filter for My Mortar Water Batching System?

If using city water, we recommend using a filter to remove any chlorine or other chemicals which can damage the pump or other parts of the system. A simple carbon filter like those used on fish tanks will work well and only needs to be replaced every few months.

How Much Water Does the Mortar Water Batching System Pump?

The water pump is approximately 1/2 gallon per second. However it will vary with wear, voltage, and other variables. It is best practice to calibrate each time you stage. Using the gallon markers on the tank, you can put a timer on 5 gallons and see how long it takes to fill. This will give you a good idea of your flow rate for that day. Water batching systems should be flushed with clean water after each use.

About the Timer on the Mortar Water Batching System

The timer is very easy to set. Just select the amount of time you need and press the button. These water batching systems will automatically dispense the exact amount of water needed for your batch.

Please contact us for more information on the best water batching system for your needs. We are happy to answer any questions you may have about our products or services. We have decades of experience serving the community!