Toro Compact Utility Loaders
Help landscape professionals complete work more productively.
Toro e-Dingo® 500 Wheeled
Introducing the world’s first electric Dingo®. Built for indoors but strong enough for outdoors! As a market leader in compact utility loaders, Toro has made a major step into the electric equipment marketplace with the introduction of the new Toro® e-Dingo® 500 compact utility loader. The e-Dingo allows contractors and construction professionals to realize all the benefits and power of a standard compact utility loader with no fuel costs and zero exhaust emissions. Greater efficiency, and reliable performance sets the e-Dingo apart for faster completion times and greater ROI for Rental partners. It’s powered by lithium-ion battery technology designed for tasks that require heavy or continuous operation for indoor applications. The maximum operating capacity of 515 pounds reduces labor and hauling time.
Toro Dingo® 320-D
The labor-saving Dingo® 320-D gives you greater capability and effortless maneuverability so you can get more done with less time in a short learning curve-even for inexperienced operators.
These machines are built to deliver a high power-to- weight ratio in the compact utility loader category. The Dingo 320-D also has zero-turn maneuverability to handle countless jobs on every site… dig, haul, plant and build.
Toro Dingo® 323
Equipped with the Toro designed 4-Paw®, independent 4-wheel drive system, the Dingo® 323 at 3000 psi (206.7 bar) offers incredible power and durability. Delivering 10.8 gpm (40.9 lpm) of hydraulic power with this 23 hp (17.2 kw) Kohler engine will guarantee jobsite productivity.
Toro Dingo® TX 427 Narrow Track
Toro Dingo® compact utility loaders possess the versatility to handle countless jobs on every site: dig, haul, plant and build. The TX 427 Narrow track design provides a low 5.1 psi ground pressure which is easy on turf. Designed with workers in mind, all of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately!
Toro Dingo® TX 427 – Wide Track
The Toro® Dingo® TX 427 Wide Track extends your versatility, while improving your productivity when faced with a variety of landscapes and ground conditions. The TX 427 Wide Track offers amazing hydraulic power and with only 3.6 psi ground pressure, the Dingo TX 427 is extremely gentle on delicate turf. All of this awesome power is harnessed with only 3 easy-to-use hand controls. These simple controls coupled with walk behind operator position translate into extremely short learning curves, 360° visibility and instant productivity.
Toro Dingo® TX 525 Narrow Track
Diesel. Done Right.
Our diesel Dingo® TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 13.8 gpm and pumping 24 hp to the attachments, yet has a ground pressure as low as 5.2 psi. And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.
Toro Dingo® TX 525 Wide Track
Diesel. Done Right.
Our diesel Dingo® TX models deliver what customers want: extra torque, longer engine life, and increased hydraulic flow for enhanced performance of ground-engaging attachments. The TX 525 offers amazing hydraulic power, delivering 13.8 gpm and pumping 24 hp to the attachment, yet has a ground pressure as low as 3.4 psi. And because they’re part of the full-line family, these diesels are compatible with all of Toro’s compact utility loader attachments.
Toro Dingo® TX 1000 Narrow Track
As the market leader, Toro has taken another giant step in innovation, performance and versatility with the Dingo® TX 1000.
Designed with innovative lift loader arms, its 1,000-lb. rated operating capacity delivers performance that’s an industry game-changer. The Dingo TX 1000 also offers increased reach at full height for maximum jobsite productivity. And speaking of productivity, an 81″ (206 cm) hinge pin height allows the arms to clear the side of a 30-yard dumpster or one-ton truck. This lightweight, maneuverable machine packs unmatched strength and reach in a compact package for the ultimate working advantage.
Toro Dingo® TX 1000 Wide Track
As the market leader, Toro has taken another giant step in innovation, performance and versatility with the Dingo® TX 1000.
Designed with innovative lift loader arms, its 1,000-lb. rated operating capacity delivers performance that’s an industry game-changer. The Dingo TX 1000 also offers increased reach at full height for maximum jobsite productivity. And speaking of productivity, an 81″ (206 cm) hinge pin height allows the arms to clear the side of a 30-yard dumpster or one-ton truck. This lightweight, maneuverable machine packs unmatched strength and reach in a compact package for the ultimate working advantage.
Toro Dingo® TXL 2000 Telescoping
As the market leader, Toro has taken another giant step in innovation, performance and versatility with the ALL-NEW DINGO® TXL 2000.
Toro e-Dingo® 500 Wheeled | |
Lithium Battery | Lithium-ion battery requires no maintenance |
Selectable power modes to conserve energy | ECO Mode and Auto Idle help maximize runtime |
Tires | Solid non-marking tires standard |
Offboard Charger | Offboard charger (1200W) charges in less than 8 hours |
4-Paw® Independent 4-Wheel Drive | Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains – reducing maintenance and eliminating the chance of a broken chain. |
Hydraulic Pumps | Expands versatility with 6.49 GPM hydraulic power pumps that can run most Dingo attachments, including auger up to 12” (30.5 cm) |
Compact Size & Maneuverability | Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you’ll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor. |
Fingertip Controls | Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips. |
Toro Dingo® 320-D | |
2 Ground Speeds | Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve. |
4-Paw® Independent 4-Wheel Drive | Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains – reducing maintenance and eliminating the chance of a broken chain. |
Compact Size & Maneuverability | Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you’ll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor. |
Fingertip Controls | Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips. |
Durable Hood | Durable, flexible resin hood protects your engine from damage and keeps dirt and debris out of the engine compartment. Your machine will run longer with less downtime. |
Hydraulic Power | Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30″ (76 cm) holes or trench 36″ (91 cm) deep. |
2-Pump Hydraulic System | Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power! |
Quick Attach System™ | Each attachment is equipped with Toro’s unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception – the backhoe takes 2 minutes.) |
Toro Dingo® 323 | |
2 Ground Speeds | Operator can select low or high speed ground speed. Low speed directs more hydraulic power to the attachment and high speed directs more power to the wheels. The low speed option also helps new operators shorten their learning curve. |
4-Paw® Independent 4-Wheel Drive | Directs hydraulic flow and pressure to all the wheels, at all times. You can power through the toughest conditions and reduce the likelihood of getting stuck. The 4-Paw eliminates the use of chains – reducing maintenance and eliminating the chance of a broken chain. |
Compact Size & Maneuverability | Get the Dingo into tight spaces where only hand labor could go before. Add to the easy spin steer turning, and you’ll be able to power through the toughest jobs. This means landscape contractors can use the incredible power of the Dingo to save time and money on labor. |
Fingertip Controls | Easy-to-reach 4-stick fingertip hand controls enable all functions from the operator position. The operator controls all movements of the machine and attachments with his fingertips. |
Durable Hood | Durable, flexible resin hood protects your engine from damage and keeps dirt and debris out of the engine compartment. Your machine will run longer with less downtime. |
Hydraulic Power | Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30″ (76 cm) holes or trench 36″ (91 cm) deep. |
2-Pump Hydraulic System | Independent power can be supplied to the attachment or the wheels. The 2-pump system offers a high flow of 10.8 gpm (37.9 lpm) and a low flow of 4 gpm (15.1 lpm). This provides better usage of power to get the job done as well as not relying on one pump for shared power! |
Quick Attach System™ | Each attachment is equipped with Toro’s unique Quick Attach System™. The Dingo QAS makes changing attachments as simple as turning 2 levers. Each attachment is designed to be installed in less than 1 minute. (One exception – the backhoe takes 2 minutes.) |
Toro Dingo® TX 427 Narrow Track | |
Simple Controls | You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly. |
Exclusive TX Track Drive | Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires. |
4-Pump Hydraulic System | 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! |
Compact Size | Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability. |
Air-Cooled Gasoline Engine | A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX. |
Reinforced Tracks | Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks. |
Toro Dingo® TX 427 – Wide Track | |
Simple Controls | You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly. |
Exclusive TX Track Drive | Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires. |
4-Pump Hydraulic System | 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! |
Compact Size | Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability. |
Air-Cooled Gasoline Engine | A 27 hp (20 kw) Kohler® engine provides the necessary power to drive any one of the multitude of Toro attachments available for the Dingo TX. |
Reinforced Tracks | Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks. |
Toro Dingo® TX 525 Narrow Track | |
4-Pump Hydraulic System | 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! |
Compact Size | Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability. |
Exclusive TX Track Drive | Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires. |
Hydraulic Power | Up to 10.8 gpm (40.9 lpm) at 3000 psi (207 bar) hydraulic system gives you incredible hydraulic power to auger up to 30″ (76 cm) holes or trench 36″ (91 cm) deep. |
Liquid-Cooled Diesel Engine | The 23.3 hp (17.3 kw) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require. |
Simple Controls | You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly. |
Toro Dingo® TX 525 Wide Track | |
Simple Controls | You’re up and running in a flash with three easy-to-use controls. 1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand. 2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly. |
Exclusive TX Track Drive | Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires. |
4-Pump Hydraulic System | 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it! |
Compact Size | Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability. |
Liquid-Cooled Diesel Engine | The 23.3 hp (17.3 kw) Kubota diesel engines torque curve combined with the added auxiliary hp provide attachments the added power tough jobs require. |
Reinforced Tracks | Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks. |
Toro Dingo® TX 1000 Narrow Track | |
– Loader arm design increases load capacity and greater reach at full height – Rated operating capacity over 1,000-lbs – 81″ (206 cm) hinge pin height easily clears side of a 30-yard dumpster or one-ton truck for maximum jobsite productivity – Exclusive traction control design is intuitive, easy to operate, and effortless |
|
Toro Dingo® TX 1000 Wide Track | |
– Loader arm design increases load capacity and greater reach at full height – Rated operating capacity over 1,000-lbs – 81″ (206 cm) hinge pin height easily clears side of a 30-yard dumpster or one-ton truck for maximum jobsite productivity – Exclusive traction control design is intuitive, easy to operate, and effortless |
|
Toro Dingo® TXL 2000 Telescoping | |
Telescoping Arms | A Toro-exclusive telescoping arm design allows the operator to lift loads up to 123” high (hinge pin height) and reach out 44” for placement and removal of jobsite materials. |
2,000 lbs. ROC | An industry leading 2,000 lbs. rated operating capacity allows the operator to handle many jobsite materials suited for larger machines. |
Superior Visibility | A dedicated stand-on machine offers superior 360° visibility for optimized jobsite performance and awareness. |
Controls | Toro’s exclusive traction control design allows operator’s of all skill levels to operate the machine with ease and precision. The loader arm control is designed to allow not only loader arm function control, but has the telescoping function, proportional auxiliary control, and directional left/right control for applicable Toro TXL 2000 attachments. |
Compact Footprint | A 54” wide frame allows the machine to access smaller spaces that larger machines are not able to. |
Ease of Access | The dedicated stand-on platform allows the operator to step-on and step-off the machine with ease and comfort to allow for enhanced jobsite efficiencies – not having to enter/exit a cab. |
Toro e-Dingo® 500 Wheeled | |||
Air Filter | Two-stage, heavy-duty, remote | Auxillary Flow | 21.4 gpm |
Controls | Patented electronic traction control design | Cooling System | Liquid Cooled |
Engine | 49.6 hp (37 kW) Kubota D1803 Diesel | Ground Clearance | 6.3″ (16 mm) |
Ground Pressure | 5.3 PSI | Ground Speed | 5.4 mph (8.6 km/h) |
Height | 67.8″ (172 cm) | Hinge Pin Height | 98.6″ (250 cm) retr, 123.4″ (313 cm) ext |
Hydraulic System Pressure | 3,000 PSI | Length | 136.9″ (348 cm) w/ bucket, 98.8″ (251 cm) w/o |
Operating Capacity | 2,000 lbs (907 kg) retr, 920 lbs (417 kg) ext. | Reservoir Capacity | 15.25 gallons (57.7 liters) |
Steering Controls | Patented electronic traction control design | Tip Capacity | 5,715 lbs (2,592 kg) retr, 2,620 lbs (1,188 kg) ext. |
Track | 162.2 ” x 11.8″ (413 cm x 30 cm) | Track Width | 11.8″ (30 cm) |
Traction Flow | 21.5 gpm (81.4 lpm) each pump | Weight | 6,655 lbs (3,019 kg) |
Width | 54″ (137 cm) | ||
Toro Dingo® 320-D | |||
Air Filter | Two-stage, heavy-duty, remote | Controls | Key, throttle, choke |
Cooling System | Liquid Cooled | Engine | 20 HP (14.9 kw) Kubota® D722 |
Ground Clearance | 5.8″ (15 cm) front & rear | Ground Speed | 0-3.0 mph (0-4.8 km/h) / 0-3.0 mph (0-4.8 km/h) |
Height | 48.7″ (123.7 cm) | High Flow Pump | 10.8 gpm (40.9 lpm) |
Hinge Pin Height | 66″ (167.6 cm) | Hydraulic System Pressure | 3,250 PSI |
Length | 82.2″ (208.8 cm) w/bucket; 62″ (157.5 cm) w/o bucket | Loader Hydraulic System | 2 control levers- push/pull |
Low Flow Pump | 4 gpm (15.1 lpm) | Operating Capacity | 475 lbs. (215.9 kg) |
Reservoir Capacity | 14.8 gallons (56 liter) | Steering Controls | Zero turn type w/ 2 controls |
Tip Capacity | 475kg | Weight | 1,722 lbs (781 kg) |
Width | 40.5″ (103 cm) standard tires; 35″ (90 cm) narrow tires | ||
Toro Dingo® 323 | |||
Air Filter | Two-stage, heavy-duty, remote | Controls | Key, throttle, choke |
Cooling System | Air cooled | Engine | 23 hp (17.2 kw) Kohler® Command Series CH23 |
Ground Clearance | 5.8″ (15 cm) front & rear | Ground Speed | 0-3.7 mph (0-6 km/h) / 0-3.7 mph (0-6 km/h) |
Height | 48.7″ (123.7 cm) | High Flow Pump | 10.8 gpm (40.9 lpm) |
Hinge Pin Height | 66″ (167.6 cm) | Hydraulic Reservoir Cap. | 14.8 gallons (56 L) |
Hydraulic System Pressure | 3,250 PSI | Length | 82.2″ (208.8 cm) w/bucket; 62″ (157.5 cm) w/o bucket |
Loader Hydraulic System | 2 control levers- push/pull | Low Flow Pump | 4 gpm (15.1 lpm) |
Operating Capacity | 475 lbs. (215.9 kg) | Reservoir Capacity | 17 gallons (64 liter) |
Steering Controls | Zero turn type w/ 2 controls | Tip Capacity | 1,030 lbs (467 kg) |
Weight | 1,567 lbs (711 kg) | Width | 40.5″ (103 cm) standard tires; 35″ (90 cm) narrow tires |
Toro Dingo® TX 427 Narrow Track | |||
Cooling System | Air Cooled | Engine | 25 HP (18.6 kW) Kohler Command Pro Series CH 740 |
Flow | 11.4 gpm (43.2 lpm) | Ground Clearance | 4.6″ (11.7 cm) |
Ground Speed | 0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h) | Height | 46.1″ (117.1 cm) |
Hinge Pin Height | 65.8″ (167.1 cm) | Hydraulic System Pressure | 3,000 PSI |
Length | 92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket | Loader Hydraulic System | Joystick control for all funct |
Operating Capacity | 535 lbs. (243 kg) | Reservoir Capacity | 10.5 gallons (40 liters) |
Tip Capacity | 1,530 lbs. (694 kg) | Track | 96.6″ x 5.9″ (245 cm x 15 cm) |
Weight | 1,882 lbs (854 kg) | Width | 33.7″ (85.6 cm) |
Toro Dingo® TX 427 – Wide Track | |||
Cooling System | Air Cooled | Engine | 25 HP (18.6 kW) Kohler Command Pro Series CH 740 |
Flow | 11.4 gpm (43.2 lpm) | Ground Clearance | 4.6″ (11.7 cm) |
Ground Speed | 0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h) | Height | 46.1″ (117.1 cm) |
Hinge Pin Height | 65.8″ (167.1 cm) | Hydraulic System Pressure | 3,000 PSI |
Length | 92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket | Loader Hydraulic System | Joystick control for all functions |
Operating Capacity | 535 lbs. (243 kg) | Reservoir Capacity | 10.5 gallons (40 liters) |
Tip Capacity | 1,530 lbs. (694 kg) | Track | 96.6″ x 9.5″ (245 cm x 24 cm) |
Weight | 1,990 lbs (902 kg) | Width | 41″ (104 cm) |
Toro Dingo® TX 525 Narrow Track | |||
Cooling System | Liquid Cooled | Engine | 23.3 HP (17.3kW) Kubota D902 |
Flow | Traction: 16.9 gpm (each pump); Auxiliary: 13.8 gpm | Ground Clearance | 4.6″ (11.7 cm) |
Ground Pressure | 5.0 PSI | Ground Speed | 0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h) |
Height | 46.1″ (117.1 cm) | Hinge Pin Height | 65.8″ (167.1 cm) |
Hydraulic System Pressure | 3,000 PSI | Length | 92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket |
Loader Arm Flow | 6 gpm (22.7 lpm) | Loader Hydraulic System | Joystick control for all funct |
Operating Capacity | 553 lbs. (251 kg) | Reservoir Capacity | 10.5 gallons (40 liters) |
Tip Capacity | 1,580 lbs. (717 kg) | Track | 96.6″ x 5.9″ (245 cm x 15 cm) |
Traction Flow | 16.9 gpm (64 lpm) | Weight | 1,904 lbs (864 kg) |
Width | 33.7″ (85.6 cm) | ||
Toro Dingo® TX 525 Wide Track | |||
Cooling System | Liquid Cooled | Engine | 23.3 HP (17.3 kW) Kubota D902 |
Flow | 13.8 gpm (52 lpm) | Ground Clearance | 4.6″ (11.7 cm) |
Ground Pressure | 3.5 PSI | Ground Speed | 0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h) |
Height | 46.1″ (117.1 cm) | Hinge Pin Height | 65.8″ (167.1 cm) |
Hydraulic System Pressure | 3,000 PSI | Length | 92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket |
Loader Arm Flow | 6 gpm (23 lpm) | Loader Hydraulic System | Joystick control for all funct |
Operating Capacity | 553 lbs. (251 kg) | Reservoir Capacity | 10.5 gallons (40 liters) |
Tip Capacity | 1,580 lbs. (717 kg) | Track | 96.6″ x 9.5″ (245 cm x 24 cm) |
Traction Flow | 16.9 gpm (64 lpm) | Weight | 2,013 lbs (907 kg) |
Width | 41″ (104 cm) | ||
Toro Dingo® TX 1000 Narrow Track | |||
Auxillary Flow | 15.2 gpm | Controls | Patented traction control design |
Cooling System | Liquid Cooled | Engine | 24.9 HP (18.6 kW) Kubota® D1305 Diesel |
Ground Clearance | 6.0″ (15 cm) | Ground Pressure | 5.4 PSI |
Ground Speed | 3.8 mph (6.1 km/h) | Height | 53.2″ (135 cm) |
Hinge Pin Height | 81″ (206 cm) | Hydraulic System Pressure | 3,000 PSI |
Length | 100.7″ (256 cm) w/bucket; 81.7″ (208 cm) w/o bucket | Operating Capacity | 1,000 lbs (454 kg) (35% of Tip Capacity) |
Reservoir Capacity | 10 gallons (57.5 liters) | Steering Controls | Patented traction control design |
Tip Capacity | 2,857 lbs (1,296 kg) | Track | 127.6″ x 5.9″ (324 cm x 15 cm) |
Track Width | 5.9″ (15 cm) | Weight | 2,785 lbs (1,263 kg) |
Width | 33.7″ (86 cm | ||
Toro Dingo® TX 1000 Wide Track | |||
Air Filter | Two-stage, heavy-duty, remote | Auxillary Flow | 15.2 gpm |
Controls | Patented traction control design | Cooling System | Liquid Cooled |
Engine | 24.9 HP (18.6 kW) Kubota® D1305 Diesel | Ground Clearance | 6.0″ (15 cm) |
Ground Pressure | 3.6 PSI | Ground Speed | 4.7 mph (7.6 km/h)/ /4.7 mph (7.6 km/h) |
Height | 53.2″ (135 cm) | Hinge Pin Height | 81″ (206 cm |
Hydraulic System Pressure | 3,000 PSI | Length | 100.7″ (256 cm) w/bucket; 81.7″ (208 cm) w/o bucket |
Operating Capacity | 1,075 lbs (488 kg) (35% of Tip Capacity) | Reservoir Capacity | 10 gallons (57.5 liters) |
Steering Controls | Patented traction control design | Tip Capacity | 3,071 lbs (1,393 kg) |
Track | 127.6″ x 9.5″ (324 cm x 24 cm) | Track Width | 9.5″ (24 cm) |
Traction Flow | 13.3 gpm (each pump) | Weight | 2,860 lbs (1297 kg) |
Width | 41″ (104 cm) | ||
Toro Dingo® TXL 2000 Telescoping | |||
Air Filter | Two-stage, heavy-duty, remote | Auxillary Flow | 21.4 gpm |
Controls | Patented electronic traction control design | Cooling System | Liquid Cooled |
Engine | 49.6 hp (37 kW) Kubota D1803 Diesel | Ground Clearance | 6.3″ (16 mm) |
Ground Pressure | 5.3 PSI | Ground Speed | 5.4 mph (8.6 km/h) |
Height | 67.8″ (172 cm) | Hinge Pin Height | 98.6″ (250 cm) retr, 123.4″ (313 cm) ext |
Hydraulic System Pressure | 3,000 PSI | Length | 136.9″ (348 cm) w/ bucket, 98.8″ (251 cm) w/o |
Operating Capacity | 2,000 lbs (907 kg) retr, 920 lbs (417 kg) ext. | Reservoir Capacity | 15.25 gallons (57.7 liters) |
Steering Controls | Patented electronic traction control design | Tip Capacity | 5,715 lbs (2,592 kg) retr, 2,620 lbs (1,188 kg) ext. |
Track | 162.2 ” x 11.8″ (413 cm x 30 cm) | Track Width | 11.8″ (30 cm) |
Traction Flow | 21.5 gpm (81.4 lpm) each pump | Weight | 6,655 lbs (3,019 kg) |
Width | 54″ (137 cm) |
Toro Compact Utility Loaders
Toro e-Dingo® 500 Wheeled
Toro Dingo® TX 1000 Narrow Track/Wide Track
Toro Dingo® TXL 2000 Telescoping
Need More Info?
Call or fill out the form for more information.