Rolair 6590HK18 13.8 CFM @ 90 PSI (6.5hp gas)
Delivers up to 50% more CFM by comparison.


Rolair 6590HK18 13.8 CFM @ 90 PSI (6.5hp gas)
The 6590HK18, which was engineered as an upgrade to the 4090HK17, delivers up to 50% more CFM by comparison. Delivering 13.8 CFM @ 90 PSI, this unit incorporates a 196 cc (GX200) Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.
Optional Equipment: Filter-Regulator-Lubricator Sets
ABOUT THE PUMP
Heavy-Duty, Single Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Cast-Iron Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 11″ Flywheel, Oil Sight Gauge
ABOUT THE ENGINE
196 cc (6.5 HP) Honda 4 Cycle, Complete Die Cast Aluminum Alloy with Cast-Iron Sleeve, Overheard Valves, Retractable Starter, On/Off Switch, Splash Lubricated, Low Oil Shutdown
STANDARD EQUIPMENT
- Pressure Gauge 0-200 in 5 lb. Graduations
- Automatic Pilot Valve Operation
- Industrial Flexible Discharge Hose
- Automatic Idle Control for Economy and Long Service Life
- Intake Filter with Silencer and Replaceable Element
- Schmidt Belt Tightening Device
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Safety Relief Valve
HORSE POWER | 196 cc (6.5 HP) |
CFM DISPLACED | 17.9 CFM |
CFM DELIVERED | 13.8 CFM @ 90 PSI |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 34 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 9 Gallons |
L X W X H | 46″x19″x28″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 190 lb. |
SHIPPING DIMENSIONS (L X W X H) | 47″ x 22″ x 36″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair 4090HK17
Air compressor has long been the top choice of framing and roofing contractors.













Rolair 4090HK17
The 4090HK17 gas-powered air compressor has long been the top choice of framing and roofing contractors. In this class, the 4090HK17 stands out because of its high CFM output, portability and rugged build. Delivering 9.3 CFM @ 90 PSI this unit incorporates the popular 163 cc (GX160) Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.
Optional Equipment:Filter-Regulator-Lubricator Sets
ABOUT THE PUMP
Heavy-Duty, Single Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Hardened Steel Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 11″ Flywheel, Oil Sight Gauge
ABOUT THE ENGINE
163 cc (5.5 HP) Honda 4 Cycle, Complete Die Cast Aluminum Alloy with Cast-Iron Sleeve, Overheard Valves, Retractable Starter, On/Off Switch, Splash Lubricated, Low Oil Shutdown
STANDARD EQUIPMENT
- Pressure Gauge 0-200 PSI in 5 lb. Graduations
- Automatic Pilot Valve Operation
- 110-135 Operating Pressure Range
- Industrial Flexible Discharge Hose
- Automatic Idle Control for Fuel Economy and Long Service Life
- Intake Filter with Silencer and Replaceable Element
- Schmidt Belt Tightening Device
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Dual Safety Relief Valves
HORSE POWER | 163 cc (5.5 HP) |
CFM DISPLACED | 13.1 CFM |
CFM DELIVERED | 9.3 CFM @ 90 PSI |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 34 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 9 Gallons |
L X W X H | 46″x19″x28″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 185 lb. |
SHIPPING DIMENSIONS (L X W X H) | 47″ x 22″ x 36″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair 5715K17 7.3 CFM
Capable of running on a 20 Amp breaker, this model will deliver 7.3 CFM, doubling the output of many direct-drive units.













Rolair 5715K17 7.3 CFM
Model 5715K17 is the choice when your electric hand-carry unit isn’t giving you enough air. Capable of running on a 20 Amp breaker, this model will deliver 7.3 CFM, doubling the output of many direct-drive units. Additionally, the low-RPM pump and motor combine for quiet operation.
ABOUT THE PUMP
Heavy-Duty, Single Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Hardened Steel Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 11″ Flywheel, Oil Sight Gauge.
ABOUT THE MOTOR
1.5 HP, 1755 RPM, Open Drip Proof, 115/230 Volt – 60 Hz, Ball Bearings, Overload Protection w/Manual Reset.
STANDARD EQUIPMENT
- Pressure Gauge 0-200 in 5 lb. Graduations
- Square D Pressure Switch with Unloader
- Accessory Support Clip
- Intake Filter with Silencer and Replaceable Element
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Safety Relief Valve
HORSE POWER | 1.5 HP |
CFM DISPLACED | 10.1 CFM |
CFM DELIVERED | 7.3 CFM @ 90 PSI |
PUMP/MOTOR RPM | 1725 RPM |
OVERLOAD PROTECTION | Yes (Manual Reset Standard) |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 34 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 9 Gallons |
L X W X H | 46″x19″x28″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 180 lb. |
SHIPPING DIMENSIONS (L X W X H) | 47″ x 22″ x 36″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair GD4000PV5H 4.1 CFM @ 90 PSI
Small air compressor













Rolair GD4000PV5H 4.6 CFM @ 90 PSI.
Model GD4000PV5H is the right choice when you need a small air compressor, but don’t have the luxury of electricity on the job site. The fuel-efficient 118 cc (GX120) Honda engine combined with the high-output direct drive pump produces 4.6 CFM @ 90 PSI.
STANDARD EQUIPMENT
- Regulator w/Air Line Pressure Gauge
- Universal Quick Disconnect w/Plug
- 4 oz. Crankcase Pre-filled with Oil
- 110/135 PSI Operating Pressure
- Automatic Engine Throttle for Economy and Long Service Life
- Factory Tested
- Safety Relief Valve
HORSE POWER | 118 cc (4 HP) |
CFM DISPLACED | 8.3 CFM |
CFM DELIVERED | 4.6 CFM @ 90 PSI |
OVERLOAD PROTECTION | No |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 4 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 1 |
TANK CAPACITY | 4.5 Gallons |
L X W X H | 22″x16″x16″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 72 lb. |
SHIPPING DIMENSIONS (L X W X H) | 23″ x 17″ x 17.5″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair FC2002 4.1 CFM @ 90 PSI
Classic stack-tank design combined with a low-amp draw, 2 HP motor for high output and consistent production.













Rolair FC2002 4.1 CFM @ 90 PSI.
Model FC2002 features a classic stack-tank design combined with a low-amp draw, 2 HP motor for high output and consistent production. 4.1 CFM @ 90 PSI. Motor features also include manual-overload protection for longer life and ball bearings for great durability. Oversized crankcase helps hold oil viscosity longer and protects pump on unlevel surfaces.
ABOUT THE PUMP
ROLAIR Quality, Single Stage, Ball Bearings, Cast-Iron Cylinder, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 3400 RPM, S-1 Rated for Continuous Duty, Low-Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
- 100% Duty-Cycle Motor
- Pressure Switch with On/Off Lever
- Regulator with Air Line Pressure Gauge
- 12 oz. Crankcase Pre-filled with Oil
- 95/125 PSI Operating Pressure
- Factory Tested
- Safety Relief Valve
HORSE POWER | 2 HP |
CFM DISPLACED | 8.7 CFM |
CFM DELIVERED | 4.1 CFM @ 90 PSI |
PUMP/MOTOR RPM | 3400 RPM |
OVERLOAD PROTECTION | Yes (Manual Reset Standard) |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 12 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 1 |
TANK CAPACITY | 4.3 Gallons |
L X W X H | 20″x15″x17″ |
DECIBEL RATING | 79 dBA |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 62 lb. |
SHIPPING DIMENSIONS (L X W X H) | 22″ x 16″ x 18″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair JC20 20.1 CFM at 90 PSI (9 HP Gas)
This quiet, 2 horsepower electric air compressor is perfect for light duty framing and roofing work.













Rolair JC20
Model JC20 takes the oilless category to the next level. Capable of delivering 4.5 CFM @ 90 PSI, this quiet, 2 horsepower electric air compressor is perfect for light duty framing and roofing work. The JC20 utilizes a two-cylinder pump powered by a 1700 RPM low-amp draw motor for maximum efficiency. Additional features include a heavy-duty roll-cage, integrated cord wrap, upward-facing gauges and a quarter-turn drain valve.
ABOUT THE PUMP
Super Quiet, ROLAIR Quality, Single Stage, Oil-Less, Two Cylinder, Ball Bearings, Cast-Aluminum Cylinder, Stainless-Steel Reed Valves, Low RPM for Quiet Operation – ONLY 70 dB!!
ABOUT THE MOTOR
2 HP, 1700 RPM, Low Amp Draw, Automatic Overload Protection, 115 Volt – 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability
STANDARD EQUIPMENT
- Decibel Level – ONLY 70 dB!!
- 12 Amp Motor
- Roll-Cage Design to Protect Pump/Motor
- Start/Stop Pressure Switch
- Safety Relief Valve
- Dual Intake Filters
- Air Line Regulator and Pressure Gauge
HORSE POWER | 2 HP |
CFM DELIVERED | 4.5 CFM @ 90 PSI |
PUMP/MOTOR RPM | 1700 |
OVERLOAD PROTECTION | Yes (Manual) |
LUBRICATION TYPE | Oil-Less |
PUMP OIL CAPACITY | N/A |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 3 Gallons |
L X W X H | 20″x20″x15″ |
DECIBEL RATING | 70 dBA |
SHIPPING WEIGHT | 75 lb. |
SHIPPING DIMENSIONS (L X W X H) | 21″ x 21″ x 16″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair JC10PLUS
Super-quiet oilless air compressor













Rolair JC10PLUS
Model JC10PLUS – a super-quiet oilless air compressor – is the follow-up to our wildly popular JC10. The JC10PLUS features a host of improved features including a larger tank, sturdier roll-cage, integrated cord wrap and upward-facing gauges. The two-cylinder pump is powered by a 1700 RPM low-amp draw motor for maximum efficiency.
ABOUT THE PUMP
Super Quiet, ROLAIR Quality, Single Stage, Oil-Less, Two Cylinder, Ball Bearings, Cast-Aluminum Cylinder, Stainless-Steel Reed Valves, Low RPM for Quiet Operation – ONLY 60 dB!!
ABOUT THE MOTOR
1 HP, 1725 RPM, Low Amp Draw, Automatic Overload Protection, 115 Volt – 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
- Start/Stop Pressure Switch
- Roll-Cage Design to Protect Pump/Motor
- Safety Relief Valve
- Intake Filter/Silencer
- 7.5 Amp Motor
- Quiet – ONLY 60 decibels!!
- Air Line Regulator and Pressure Gauge
- Cord Wrap
HORSE POWER | 1 HP |
CFM DISPLACED | 4.1 CFM |
CFM DELIVERED | 2.4 CFM @ 90 PSI |
PUMP/MOTOR RPM | 1700 |
OVERLOAD PROTECTION | Yes (Automatic) |
LUBRICATION TYPE | Oil-Less |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 2.5 Gallons |
L X W X H | 16.5″ x 16.5″ x 14″ |
DECIBEL RATING | 60 dBA |
SHIPPING WEIGHT | 50 lb. |
SHIPPING DIMENSIONS (L X W X H) | 17″ x 17″ x 15″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair 8422HK30 20.1 CFM at 90 PSI
Largest portable two-stage unit available on the market













Rolair 8422HK30 20.1 CFM at 90 PSI (9 HP Gas)
Model 8422HK30 is the largest portable two-stage unit available on the market, delivering 20.1 CFM @ 90 PSI. This model incorporates the popular 270 cc (GX270) Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.
Optional Equipment: Filter-Regulator-Lubricator Sets, Electric Start
ABOUT THE PUMP
Heavy-Duty, Two Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Cast-Iron Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 15.16″ Flywheel, Oil Sight Gauge
ABOUT THE ENGINE
270 cc (9 HP) Honda 4 Cycle, Complete Die Cast Aluminum Alloy with Cast-Iron Sleeve, Overheard Valves, Retractable Starter, On/Off Switch, Splash Lubricated, Low Oil Shutdown
STANDARD EQUIPMENT
- Pressure Gauge 0-300 in 5 lb. Graduations
- Automatic Pilot Valve Operation
- Industrial Flexible Discharge Hose
- Automatic Idle Control for Economy and Long Service Life
- Intake Filter with Silencer and Replaceable Element
- Schmidt Belt Tightening Device
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Safety Relief Valve
HORSE POWER | 270 cc (9 HP) |
CFM DISPLACED | 24.4 CFM |
CFM DELIVERED | 20.1 CFM @ 90 PSI |
OVERLOAD PROTECTION | No |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 47 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 9 Gallons |
L X W X H | 46″x28″x35″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 295 lb. |
SHIPPING DIMENSIONS (L X W X H) | 47″ x 28″ x 36″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair 5230K30CS 18.8 CFM at 90 PSI (220V)
Biggest electric portable available













Rolair 5230k30CS 18.8 CFM at 90 PSI (220V)
Model 5230K30CS – the biggest electric portable available – delivers 18.8 CFM @ 90 PSI. The two-stage pump allows for cooler and more efficient operation. Because of the high CFM output and for protection of the motor, this unit is built for constant-run operation.
Optional Equipment: Filter-Regulator-Lubricator Sets, 20 Gallon ASME Tank.
ABOUT THE PUMP
Heavy-Duty, Two Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Cast-Iron Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 15.16″ Flywheel, Oil Sight Gauge
ABOUT THE MOTOR
5 HP, 1740 RPM, Open Drip Proof, 230 Volt – 60 Hz, Ball Bearings, Overload Protection with Manual Reset
STANDARD EQUIPMENT
- On/Off Switch
- Pressure Gauge 0-200 in 5 lb. Graduations
- Pilot Unloader Valve
- Accessory Support Clip
- Intake Filter with Silencer and Replaceable Element
- Multi-Finned Intercoolers
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Safety Relief Valve
- Constant Speed Operation
HORSE POWER | 5 HP |
CFM DISPLACED | 23.1 CFM |
CFM DELIVERED | 18.8 CFM @ 90 PSI |
PUMP/MOTOR RPM | 1740 RPM |
OVERLOAD PROTECTION | Yes (Manual Reset Standard) |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 47 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 2 |
TANK CAPACITY | 9 Gallons |
L X W X H | 46″x27″x34″ |
DECIBEL RATING | Unavailable |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 315 lb. |
SHIPPING DIMENSIONS (L X W X H) | 47″ x 28″ x 36″ |
Need More Info?
Call or fill out the form for more information.
Related Products
Rolair VT25BIG 6.5 CFM at 90 PSI (110v)
Easy to move the VT25BIG around the job site.













The VT25BIG boasts the highest air output of any direct drive air compressor in our line-up. The continuous-duty motor-pump delivers a whopping 6.5 CFM @ 90 PSI. The foot-actuated folding handle and heavy-duty flat-free tires make it easy to move the VT25BIG around the job site.
ABOUT THE PUMP
ROLAIR Quality, Single Stage, Ball Bearings, Cast-Iron Cylinder, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2.5 HP, 3400 RPM, S1-Rated for Continuous Duty, Low-Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
- 100% Duty-Cycle Motor
- Heavy Duty Wheels for Greater Jobsite Mobility
- Start/Stop Pressure Switch with On/Off Lever
- Fold-Down Handle for Easy Storage/Low Profile
- User-Friendly Control Panel Including Gauges and 2 Quick-Disconnects,
- Safety Relief Valve
- Intake Filter with Silencer
- 13.8 Amp Motor
- Initial 10 oz. Oil Fill Included
HORSE POWER | 2.5 HP |
CFM DISPLACED | 9.3 CFM |
CFM DELIVERED | 6.5 CFM @ 90 PSI |
PUMP/MOTOR RPM | 3400 RPM |
OVERLOAD PROTECTION | Yes (Automatic) |
LUBRICATION TYPE | Splash Lubrication |
PUMP OIL CAPACITY | 10 oz. |
REED VALVE SYSTEM | Yes (Standard) |
NUMBER OF CYLINDERS | 1 |
TANK CAPACITY | 5.3 Gallons |
L X W X H | 29.5″ x 18.5″ x 42″ *handle up |
DECIBEL RATING | 86 dBA |
COUNTRY OF ORIGIN | Compressor Origin.pdf |
SHIPPING WEIGHT | 108 lb. |
SHIPPING DIMENSIONS (L X W X H) | 30″ x 21″ x 22″ |
Need More Info?
Call or fill out the form for more information.
Related Products

