Cool Machines CoolVac23
Monster Vac is the industry’s highest rated heavy-duty Gas Vacuum


Cool Machines Cool Vac 23
Monster Vac is the industry’s highest rated heavy-duty Gas Vacuum with cutting edge design features.
Here is one of the market’s most efficient vacuum machines for removal of insulation materials or cleaning up jobs after massive water, storm or fire damage.
Monster Vac is the perfect machine if you regularly have extensive removal jobs. High production rates combined with large fuel tank reduces labor time and increase profitability. This multi-purpose vacuum is the perfect match for attic insulation removal, wall spray recycle recovery and much more…
Damaged insulation material (water, fire and smoke) is heavy and it requires an industrial solution to remove the heavy material. The Monster Vac are able to vacuum heavy, damp material into a disposable bag or directly into a truck or dumpster.
All our Vacuums it is designed with steel chamber band AR-400 0.64 cm, which eliminates the need for a replaceable liner. Cool Machines can offer 3x’s the wear life of our precision manufactured perfect balanced AR-500 steel fan blades. United with our proprietary Vacuum Saver design (optional), objects are removed from the fiber before causing catastrophic damage to the impeller fan, chamber and engine.
Monster Vac comes with a Briggs & Stratton engine whom are the largest gas engine manufacturer in the world.
With 24 hr. parts availability and multiple service locations within a short radius throughout Europe, you have the best support system available to keep the engines running.
The premium grade Vanguard engine is a high-quality engine (with 3-year commercial warranty) manufactured in Japan and is widely considered one of the best in the industry.
- Briggs/Stratton 23 hp Vanguard Engine or Honda 22hp GX690
- 20″ diameter turbo blade (fully welded, curved tips)
- No load pressure equals a maximum of 28 inches of water column
- CFM rating is 3,600
- Hardox Lined turbine chamber
- Weight: 295 lbs.
- Dimensions: 42” long x 28” wide x 37” high
- Engine: Briggs “Vanguard” V-twin OHV, 5 gallon tank, positive pressure lubrication, low level oil shutdown, oil pressure shutdown switch. [electric start]
- Fan Housing: ¼” AR-400 steel fan x ¼” AR-400 steel chamber.
- Blade Diameter: 20″ Diameter
- r.p.m. / hour meter
- Engine Warranty: 3 year commercial
- 6″ dia. Inlet and Exhaust
- 10″ dia. Run-Flat Wheels
- Electric start with included 12 volt battery
- Integrated engine block cooling air filter.
Need More Info?
Call or fill out the form for more information.
Related Products
Cool Machines CoolVac-16
Effective and designed to handle larger cleanup jobs, built for daily use.











Cool Machines CV-16
The demand for retrofit is increasing. Traditionally, insulation companies needed vacuums to remove fire-damaged, moldy insulation. Various contractors including pest-control, HVAC and even fire departments are using vacuums to extract old, damaged insulating material. The HVAC industry uses vacuums for cleaning duct work.
Contractors need a versatile, portable solution to remove insulation, quickly, efficiently and cleanly. With the Cool-Vac 16, you are able to remove insulation from attics, sidewalls and crawl spaces.
Damaged insulation material (fire, smoke and water) is heavy and requires an industrial solution to remove the heavy material.
With the Cool-Vac16, you are able to vacuum heavy, damp material into 75 cu. ft. disposable bags or directly into a truck or dumpster.
- 1/4″ Hardox Liner protects the fan housing chamber. Fan housings are very expensive and run hundreds of dollars. This industrial wear strip inside the fan chamber to prevent highly abrasive fibers and foreign debris passing from damaging the housing.
- A 20 inch diameter turbo sonic FC blade [1. Forward Curve] eliminates wet fiber build up in the housing area. The turbulence created by the forward curvature sweeps the housing clean of debris.
- Fully robotically welded high abrasion resistant fan blades reduce the chance of a catastrophic failure a due to operational stress. The blades are not spot welded, but a bead runs the entirety of the blade.
- Computerized balanced blades which reduces wear to engine bearings.
- 16 h.p. Briggs and Stratton Vanguard commercial duty engine (highly regarded as one of the most durable engines in its class), provides ample power to exceed production rates of any system in its class.
- Powder-coated heavy gauge welded steel construction.
- Weight: 250 lbs.
- Dimensions: 33” long x 28” wide x 38” high
- Engine: Briggs “Vanguard” V-twin OHV, 2.25 gallon tank, positive pressure lubrication, low level oil shutdown, oil pressure shutdown switch. [electric start]
- Fan Housing: ¼” AR-400 steel fan x ¼” AR-400 steel chamber
- Blade Diameter: 20″ Diameter
- r.p.m. / hour meter
- Engine Warranty: 3 year commercial
- 6″ dia. Inlet and Exhaust
- 10″ dia. Run-Flat Wheels
- Electric start with included 12 volt battery
- Integrated engine block cooling air filter.
Need More Info?
Call or fill out the form for more information.
Related Products
Cool Machines CoolVac-11
Insulation Machine Vacuum











Cool Machines CV-11
- Specially designed turbo sonic FC blade induces fan tip turbulence which eliminates the accumulation of wet fiber and build up on blades & chamber area. Simultaneously increases the vacuum pressure giving you higher productivity.
- Fan blades are Abrasion resistant
- Robotically welded using solid welds
- Computerized dynamic balancing provides
- Smooth running precision blade
- Minimal engine bearing wear
- Welded steel heavy gauge construction
- Powder coated
- Weight: 170 lbs.
- Dimensions: 30” long x 28” wide x 38” high
- Engine: Briggs OHV Dura-lube™, 1650 Series I/C cast iron sleeve, .8 gallon tank, low level oil shutdown [manual pull start or electric]
- Fan Housing: ¼” AR-400 steel fan x ¼” AR-400 steel chamber.
- Blade Diameter: 18″ Diameter
- r.p.m. / hour meter
- Engine Warranty: 2 year consumer/1 year commercial
- 6″ dia. Inlet and Exhaust
- 10″ dia. Run-Flat Wheels
Need More Info?
Call or fill out the form for more information.
Related Products
Cool Machines CM4500
Classic series machine combines a large (125 cubic ft.) hopper, high speed production into a simple, compact machine that can do-it-all.











Cool Machine CM4500
Our classic “Big Dog” CM-4500XL series machine combines a large (125 cubic ft.) hopper, high speed production into a simple, compact machine that can do-it-all. The optional 12” x 24” oversized airlock feeder and 10 h.p. positive displacement (P.D.) blower provides the ‘punch’ to knock-out the big jobs.
Wall Spray? Bring it on!!! Our optional 10 h.p. (P.D.) Vac-Pack Recovery Systems streamline the spray process and reduce labor costs.
“Big” dry hopper (91 cubic ft./20 bags stacked bags cellulose) allows operator to leave the truck for long durations assisting with duties inside the structure.
“Fast” vacuum speeds (10 h.p. P.D. Vac-Pack system) fills the large capacity (26.5 cubic ft.) recycle hopper quickly…allowing vacuum operator ample time to scrub walls.
“Simple” dual slide gate controls for recycle and dry in a single, compact machine provide a fast, accurate application of dry blended fibers into the wall; while conserving space inside your vehicle.
Our ‘integrated recycle technology’ precisely controls the introduction of dry and recycle fiber in a separate metering hopper. This process significantly increases speed of application and decreases moisture. These features allow the contractor to reduce labor while allowing the spray nozzle to run non-stop. The “Big Dog” CM-4500 is “THE” solution to increase profits on large, demanding jobs.
Material | Production Rate |
---|---|
Cellulose | 4,500 lbs/hr (*5,400 lbs/hr) |
Fiberglass | 1,800 lbs/hr (*2,400 lbs/hr) |
Rockwool | 2,200 lbs/hr (*5,000 lbs/hr) |
Wall Spray Cellulose | 40 bags/hr |
- Weight: 2,250 lbs. (5 hp PD Blower) 2,400 lbs. (10 hp PD Blower)
- Dimensions: 112″l x 35″w x 89″h
- Hopper Capacity: 100 ft.3 (24 bags cellulose/6 bags fiberglass)
- Airlock Options: (4″ O.D. Ouput @ 6 p.s.i.)
- 12” dia. x 20” Long
- 12″ dia. x 24″ Long
- Drive Motors: 3 h.p.
- PD Blower Options:
- 5 hp / 3L, 250 c.f.m.
- 10 hp / 4L, 350 c.f.m.
- Power Requirements:
- 240 volt, 30 amp. 1-phase (5 hp PD Blower)
- 480 volt, 20 amp. 3-phase (10 hp PD Blower
Need More Info?
Call or fill out the form for more information.
Related Products
Cool Machines CM3500
Efficiency, application versatility, and components that are both simple to use and easy to repair.











Cool Machine CM3500
CM-3500XL System with dual metering hoppers, offers streamlined efficiency, application versatility, and components that are both simple to use and easy to repair. This machine provides both the start-up contractor and the high production installers a solution that makes sense.
The complete system design with modest power requirements, offers you a CM-3500XL that can be transported in a truck or trailer to the job-site, and set-up to spray or blow in minutes.
This ingenuously designed truck system with self contained hose reels, heated water tanks, and generator, provide all the necessities for a portable, self-sustaining spray system. The reduced power requirements for this system allow you to use 240 volt, 50 amps job-site power from the grid to conserve generator costs.
- Weights: 1,776 lbs. (4-Blower Box), 1,806 lbs. (5HP PD Blower)
- Dimensions:
- Side of Truck/Trailer 107″ x 29″ x 56 1/2″
- Front of Truck/Trailer 92″ x 29″ x 56 1/2″
- With Hopper Extension, 77 1/2″ to 85″ tall
- Hopper Capacity:
- Dry: 40 ft.3 (71 ft3 w/Hopper Extension)
- Airlock Options:
- 12” dia. x 20” long, w/ 4” output tube.
- 12” dia. x 24” long, w/ 4” output tube.
- Drive Motor: 3 h.p.
- Blower Options:
- 4 – 13 amp. blowers /140 c.f.m. / 6PSI (4-Blower Box)
- 5 HP 180 c.f.m. / 6PSI (PD Blower)
- 7.5HP 205CFM / 8PSI (PD Blower)
- 10HP 250CFM / 6PSI (PD Blower)
- 15HP 590CFM / 5PSI (PD Blower)
- Power Requirements:
- 30-50 amp, 240 volt, single phase, single input (4-blower or 5HP PD Blower)
- 30 amp, 240/480 volt, 3 phase, single input (10HP blower or 5HP PD Blower)
Need More Info?
Call or fill out the form for more information.
Related Products
- Display 4 Products per page
Cool Machines CM700
Reliable robust machine with simple maintenance.











Cool Machine CM700
The CM-700S (Standard), CM-700D (Deluxe) and CM-700R (Recycle) are lean, mean, blowing machines that save you some ‘green’. (cash that is). Cutting edge twin ‘scalping augers’, rugged design, and simple operation offers a reliable, robust machine with simple maintenance.
The “can-do” attitude of the do-it-yourself installer, or a professional contractor, is realized with this little dynamo capable of performing at modest rates with all fibers (Cellulose, Fiberglass, Rockwool), and all applications (attic, dense packing, sidewall spray-on).
Need something extremely portable with low power requirements? Need a lightweight recycle machine for wall spray?
We‘ve got you covered.
What a Cool way to start your business.
Material | Lbs p/hr |
---|---|
Cellulose | 950 |
Fiberglass | 400 |
Rockwool | 600 |
Production rates are measured with 100 foot hose at a 12 foot rise.
- Weight: 180 lbs.
- Dimensions: 28″l x 22″w x 58″h
- Hopper Capacity: 7.25 ft.3
- Airlock Size: 8” dia. x 10” long 4.0 p.s.i. w/ 2.5” output tube.
- Drive Motor: 1/3 h.p
- Blower Options:
- 8 amp. /104 c.f.m. (Standard)
- 13 amp. /140 c.f.m. (Deluxe)
- Power Requirements (120 volt):
- 15 amp. input (Standard)
- 15 amp. double input (Deluxe)
Need More Info?
Call or fill out the form for more information.
Related Products
- Display 4 Products per page
Cool Machines CM2400
High production dry-fiber blowing machine











Cool Machines CM2400
CM-2400 (2,3,4 and Positive Displacement blower options), CM2400VH (Vacuum Hood). The CM-2400 series machine provides an economical, high production machine with low power requirements and reduced weight/size in your truck/trailer system.
The simple design and minimal moving parts provide a machine that is low maintenance and easy to repair.
This compact, robust machine with its various options, will out-perform and out-last any machine in its class.
Standard CM-2400 Production Rates 12×12 airlock (30.5cm)
Material | Lbs p/hr | KG p/hr |
---|---|---|
Cellulose | 3000 | 1361 |
Fiberglass | 1200 | 545 |
Rockwool | 1800 | 817 |
Upgraded CM-2400 Production Rates 16×12 Airlock (40.6cm)
Material | Lbs p/hr | KG p/hr |
---|---|---|
Cellulose | 3600 | 1633 |
Fiberglass | 1400 | 635 |
Rockwool | 2000 | 907 |
Upgraded CM-2400 Production Rates 20×12 Airlock
Material | Lbs/hr | KG p/hr |
---|---|---|
Cellulose | 4500 | 2042 |
Fiberglass | 1800 | 817 |
Rockwool | 2200 | 998 |
- Weight: 720 lbs. (2 Blower Box) 750 lbs. (4 Blower Box) 780 lbs. (PD Blower)
- Dimensions: 62″l x 23″w x 48″h
- Hopper Capacity: 15 ft.3 (26 ft.3 w/ Hopper Extension)
- Airlock Options:
- 12” dia. x 12” long, 4.0 p.s.i. w/ 3” output tube.
- 12” dia. x 16” long, 4.0 p.s.i. w/ 3” output tube.
- Drive Motor Options: 1 1/2 h.p. or 2 h.p.
- Blower Options:
- 13 amp. / 140 c.f.m. (2 or 4 Blower Box)
- 5 h.p. / 250 c.f.m. (P.D. Blower)
- Power Requirements:
- 15/30 amp. double input, 120 volt (2 Blr. Box)
- 30 amp. single input , 240 volt (4 Blr. Box or PD Blr.)
Need More Info?
Call or fill out the form for more information.
Related Products
- Display 4 Products per page
Cool Machines MP-20
Heavy duty, medium pressure, diaphragm pump, belt drive for glue or water


The MP-20 is a self-priming, twin semi-hydraulic diaphragm pump with run-dry capability, featuring anodized aluminum heads for less leak points and high durability. A favorite among the professional commercial spray contractors, it’s desired for its ability to move a higher volume of glue and easy clean-up
- Weight: 97 lbs.
- Dimensions: 22″l x 16”w x 13”h
- Max Flow Rate: 5.9 g.p.m.
- Max Pressure: 350 p.s.i. (1 ½HP); 435 p.s.i. (2HP)
- Pickup: 1” Hose Barb
- Bypass: 3/4” Hose Barb
- Output: 3/8” Hose Barb
- Motor: 1 ½ HP (2HP Optional)
- Water and Oil won’t mix, but Water, Glue and Fiber can… with our high quality pumps!This is what our liquid moving pumps offer; low maintenance and a precisely controlled spray to help you get the job done right. With our experience being on the cutting edge of wall spray and commercial (glue) spray, we have learned a thing or two… one of which is offering the correct pump form the correct application. Not only do our pumps perform optimally, but we make sure your investment is protected. Our pumps feature bases with a convenient carrying handle for ease of moving. This design offers a protective cage to reduce the chances of pump damage during shipping, and traveling to, from, and on the job-site.
Choosing the Right Pump
- Different Applications: require a range of pressure and liquid volume applied in a smooth consistent manner.
- Wall Spray = higher pressure/lower volume.
- Commercial Spray (w/ Glue) = lower pressure/higher volume.
- Types of Liquid: liquids (water, high viscosity, abrasive glues) require different types of pumps. Generally speaking…diaphragm pumps work best for both glue and water while plunger pumps work best with only water requiring high pressure.
- Direct-Drive: pump and motor assemblies require less maintenance.
- Durability: “you get what you pay for”
Hose Kits for Pumps
Our hose kits include pre-assembled quick-connect or turn-on end fittings for quick set-up. Non-collapsible intake line with in-line filter, by-pass hose, and 100ft. to 166 ft. heavy duty pressure hose rated for pump at maximum pressure. Whether your supply is from a water tank, glue barrel, or a garden hose: we can get you connected to the correct hose kit for your needs.
- Different Applications: require a range of pressure and liquid volume applied in a smooth consistent manner.
Image | Name | SKU | Price | Buy |
---|
Need More Info?
Call or fill out the form for more information.
Related Products
- Display 4 Products per page
Cool Machines CM1500
High production dry-fiber blowing machine











Cool Machines CM1500
The CM-1500 is a robust machine that is “simple stupid” to operate and maintain.
Speaking of maintenance…we wrote the book on modular plug & play designs for quick troubleshooting and repairs. Translation: less down-time and more profits.
The CM-1500 and the wide range of versatility it offers is the perfect solution for the professional start-up contractor as well as a back-up to the large costly truck systems.
Ask about our ‘new’ 2-in-1 function machine (CM-1500VH) and the high production (CM-1500HP) machines to meet your special needs.
Material | Lbs p/hr |
---|---|
Cellulose | 2200 |
Fiberglass | 900 |
Rockwool | 1400 |
- Weight: 360 lbs.
- Dimensions: 38″l x 24″w x 57″h
- Hopper Capacity: 13.5 ft.3
- Airlock size: 10” dia. x 18” long, 4.0 p.s.i. w/ 3” input/output tube.
- Drive motor: 3/4 h.p.
- Blower: 13 amp. /140 c.f.m.
- Power Requirements: 15/20 amp. input (Dbl. Large)
- Extended base to accomodate larger Airlock; meaning higher performance.
- Minimal machine changes gives the same feel of our standard machine but with more power.
Need More Info?
Call or fill out the form for more information.
Related Products
- Display 4 Products per page

